One challenge was carrying out refurbishment and new building works next to a licensed nuclear facility, on a site of scientific special interest (SSSI). The site is also in a special area of conservation (SAC) very near to the River Severn and Gloucestershire Wildlife Trust.
Other unique challenges surfaced as the project commenced:
- A navigation light and mast on the hall had to be maintained and kept visible at all times, allowing safe river passage for merchant shipping
- Demolition works timed to protect migrating birds and rare bats.
- Removal of outdated engineering equipment riddled with asbestos and hydrocarbons
- A maze of tunnels under the old nuclear site put limitations on the UTC’s foundation design and construction vehicle movements
- Refurbishing the old hall involved complicated integration of a new metric structure into old imperial spaces and had to take place whilst protecting and maintaining two live transformers under the building
The technical, scientific and environmental complexities of the site required thorough, collaborative and considered methodologies as well as excellent team work and technical skills to overcome them.
The challenging task of cutting and carving the structural frame and mezzanine decks in the old hall, to accept the stunning new timber beams, required extensive survey works and accurate measurements.
In both buildings sustainable, cost comparable and attractive timber products allowed for rapid on-site build during a limited construction period. Additionally, the distinctive patterned cladding, based on dazzle camouflage of WW 1 warships, reduces the visual mass of lower levels of accommodation and inbuilt acoustic properties suppress reverberation within the main hall.
The refurbished hall was first to be handed over and the curved structure of the UTC was built around the occupied building. 90% of subcontractors were local, ensuring continuity was maintained over each project phase.
The UK’s first nuclear clean-up programme successfully brought a contaminated site back into full community use. An existing building was recycled whilst construction of new state-of-the-art training facilities took place. These facilities help to address current industry skills shortages, meeting the growing need for cyber security.
The old engineering hall was given its third lease of life following conversion into a reinvigorated, dynamic and sustainable engineering training facility.
Extensive demolition on this complex and constrained site prepared for construction of a 5,000 sq m UTC, providing specialist education in digital technology, cyber security and advanced engineering.
As an SGS ‘Employer of the Future’ partner, Kier ensured the site’s inspirational setting shone through the construction works. SGS aimed for a UTC intake of 40 students in September 2017. Astonishingly they got over 200, with almost 20% being female.
" Professional in the true sense of the word: that professionalism I think has been the cornerstone of the delivery of this project. Kier understood how important it was to get everybody on board. Selling a part completed building is a really important task irrespective of what’s happening that day, how many people on site and the pressures on time: I never felt that I was imposing, and I think that’s quite important. "Group CEO SGS College
Rising from the ashes of a decommissioned former nuclear site, SGS Berkeley Green, a converted 1940’s engineering hall, and new University Technical College (UTC) are the first educational buildings to be completed on a new ground-breaking GREEN campus, within Gloucestershire Science and Technology Park.
Building a new school for 1,100 students within the grounds of the original. Abiding by strict environmental regulations and generating a wealth of social value within the local community.
The addition of high-class sport and leisure facilities for one of the UK’s most distinguished private schools has created flexible, multi-purpose spaces wrapped around the existing centre. Alongside a new sports hall, activity studios, squash courts and a gym, are additional changing rooms, a MUGA and new car park.
Refurbishment and fit-out of a six-storey 19th century mill building and coach house with a new build sports hall in Bradford, maintaining the building’s heritage and ensuring it is suitable for teaching.
Updating an icon, providing pride of place for Charles Darwin’s finds, creating a prominent spot for a fully-fledged Finback whale, and being test abseiled by Sir David Attenborough.
Procured through the Scape National Minor Works Framework, this scheme involved the construction of a new primary school provision at the existing Stowlawn Primary School in Bilston, Wolverhampton. Unique to this project was the building’s existing Passivhaus principals and bespoke brickwork façade.
Procured through the Scape National Minor Works Framework, this extension and remodelling project has increased the School’s capacity whilst improving their Ofsted rating from ‘Good’ to ‘Outstanding’.
A joint venture with Kier Major Projects for the University of Northampton. The project marked the first time Kier had committed to a large-scale Light Gauge Steel (LGS) frame project and is the largest LGS project to date in the UK.
Creating a ‘Knowledge Quarter’ for Liverpool, a collaboration between the University of Liverpool and Liverpool John Moores University, delivering a highly adaptable research environment and incubator space for start-ups and SMEs who are developing digital sensor technologies and applications.
Bringing an iconic and sustainable development to the Carmarthen campus of the University of Wales, providing 40,000 sq. ft. of accommodation for for Welsh Media company S4C and the University's new media faculty and offices, and achieving a BREEAM Excellent certificate for sustainability.
The design and construction of a sports pavilion, including FA compliant changing facilities, gym, office space and flexible recreation areas. In addition a first floor balcony was incorporated into the design which overlooks the sports pitches.
New build secondary school developed under the Education Skills and Funding Agency's (ESFA) Priority Schools Building Programme (PSBP), providing modern accommodation with increased pupil capacity and facilities for classrooms, in addition to a Learning Resource Centre which integrates with pupil breakout areas.
The UK – and Coventry as a city - is well-established as a leader in automotive, aerospace, rail and marine design. Coventry University’s National Transport Design Centre (NTDC) aims to boost design innovation in the transport sector and bridge the current shortfall in creative skills.
New build secondary school developed under the ESFA’s Priority Schools Building Programme (PSBP), providing modern accommodation with increased pupil capacity for 1,200 pupils and 300 post-16 students.
Designing and constructing of a new joint campus school for The Highland Council to incorporate two neighbouring primary schools, Caol Primary School and St Columba's RC Primary School, together with a community facility.
Undertaking a major refurbishment of a former Council building, originally a late Edwardian school, into a new school in Haringey, for 104 students aged 5–19 who have a primary diagnosis of autism.
Kier Design and Business Services working in partnership with the London Borough of Hackney to deliver mixed-use developments and education schemes to create revenue for further local investment.
Delivering a new secondary school on the Great Western Park Development in Didcot, ensuring it was completed in time for the start of the new school year, creating extensive outdoor sports facilities as well as a building for 1,200 students and working alongside contractors delivering housing projects.
Revolutionary in its design, the first Degree Apprenticeship Centre on the Warwick University Campus marks a new stage in the University’s teaching programme. The new three-storey 2,400m² innovative development centre provides a bridge from education to industry.
Building a brand new 8 form of entry school situated in Thamesmead in South East London. The new school holds 1,200 pupils and includes teaching spaces, science laboratories, ICT suites, a dance studio, art and music rooms plus a large four court sports hall and hard court play area.
New state-of-the-art research centre, the Innovative Materials, Processing and Numerical Technologies (IMPACT) building, situated on the Swansea University Bay Campus provides future proof, highly specialised laboratories for fundamental and applied research and delivers a high impact, transformative research environment for industry and academia to collaborate in advanced engineering and materials.
We have delivered over £200m of works for SEGRO, across 33 projects over the last fourteen years. Working collaboratively with SEGRO and its tenants, we have a successful track record and flexible approach in delivering and adapting industrial units to tenants’ needs.